R150

– Altura al perno de vuelco: 3023 mm

– Capacidad operativa de carga: 748 kgs

– Potencia: 46 HP – Motor: YANMAR

– Combustible: DIESEL

– Bomba hidráulica: 64 LPM

– Alto flujo: —

– País de fabricación: USA

Categoría: Minicargadores.

Descripción

Specifications (standard)

Dimensions
A Overall Operating Height – Fully Raised	152.6″
B Height to Hinge Pin – Fully Raised	119″
C Overall Height to Top of ROPS	76.7″
D Overall Length with Bucket	122.1″
E Dump Angle at Full Height	38°
F Dump Height	93.7″
G Dump Reach at Full Height	22.8″
J Rollback at Ground	28°
M Rollback Angle at Full Height	99°
O Seat to Ground Height	35.6″
P Wheelbase	38.9″
Q Overall Width – Less Bucket A	63.2″
R Bucket Width	61.5″
S Ground Clearance to Chassis	6.3″
V Overall Length – Less Bucket	93.9″
W Departure Angle	21°
X Clearance Circle – Front w/ Bucket	73.6″
Y Clearance Circle – Front w/o Bucket	45.4″
Z Clearance Circle – Rear	57.7″
Standard Specification Tire Size	10.00 x 16.5 HD
Engine
Make	Yanmar
Model	4TNV88C-KMS Tier IV
Gross Power @ 2500 rpm	46.3 hp
Net Power @ 2500 rpm	44.5 hp
Maximum Torque	107.8 ft.-lbs. @ 1820
Displacement	133.6 cu.in.
Hydraulic System
Auxiliary Hydraulics – Standard	17 gpm
High-Flow Auxiliary Hydraulics – Option	N/A
Reservoir Capacity	11 gal.
Electrical System
Battery	12-volt
Starter	12-volt
Alternator	100-amp
Capacities/Weights
Rated Operating Capacity^B	1,500 lbs.
Rated Operating Capacity with Optional Counterweight^B	1,650 lbs.
Fuel Tank	16.5 gal.
Travel Speed – Maximum	7.4 mph
Travel Speed with Two-Speed Option – Maximum	N/A
Operating Weight^C – Approximate	5,930 lbs.

A – Overall width is dependent upon the amount of wheel offset.

B – Per SAE J818, SAE J732, and ISO 14397

C – Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.